NHTSA service bulletin

NHTSA Service Bulletin 10187946: 2017, 2018 Ford Gt

Official manufacturer communication context for 2017, 2018 Ford Gt, with affected products, buyer checks and links into Carchieve recall, problem and VIN research.

NHTSA service bulletin 10187946 summary graphic for 2017, 2018 Ford Gt
10187946NHTSA document ID
Manufacturer communicationcommunication type
1affected product rows
82/100quality score

Reviewed June 2026 from NHTSA manufacturer communication and service bulletin records. Carchieve is independent and not affiliated with any vehicle manufacturer or government agency.

Quick answer

Some 2017-2021 Ford GT vehicles may exhibit a creak/snap noise from the front door strut(s) when the driver and/or passenger doors are opened/closed. This may be due to reduced lubrication and/or dirt present at the front door strut ball and socket joints. If the noise is confirmed to be from the front door strut(s), the front door strut(s) should be removed per Workshop Manual(WSM), Section 501-03. After removal, the front door strut ball on the body and the socket of the front door strut should be thoroughly cleaned of existing grease and dirt. Once cleaned, apply Motorcraft XG-11 High Temperature 4x4 Front Axle and Wheel Bearing Grease to the socket of the front door strut before reassembly. Any excess grease should be wiped away from all front door strut ball and socket joints.

What this bulletin may mean before buying

Treat this as service research, not a verdict on one car. Before you buy, compare this communication with official recall campaigns, model-level owner complaint patterns, and the exact vehicle’s VIN-decoded specifications. A bulletin can help you ask a seller or dealer sharper questions about software updates, known repairs, warranty extensions and service history.

Affected products listed in this communication

MakeModelModel yearsBuyer note
FordGt2017, 2018Ask for service records and run the exact VIN before purchase.

Buyer checklist

  1. Run the 17-character VIN and confirm the year, make, model, engine and equipment match the listing.
  2. Check recall campaign pages for safety actions that may require dealer repair.
  3. Compare this bulletin with common problem pages for the same model and component area.
  4. Ask the seller or dealer whether the bulletin procedure, update or inspection has already been completed.
  5. Use the used-car buying checklist and get an independent inspection.

Frequently asked questions

What is NHTSA service bulletin 10187946?

Some 2017-2021 Ford GT vehicles may exhibit a creak/snap noise from the front door strut(s) when the driver and/or passenger doors are opened/closed. This may be due to reduced lubrication and/or dirt present at the front door strut ball and socket joints. If the noise is confirmed to be from the front door strut(s), the front door strut(s) should be removed per Workshop Manual(WSM), Section 501-03. After removal,.

Is a service bulletin the same as a recall?

No. A recall is a safety campaign with a required remedy for affected VINs. A service bulletin or manufacturer communication usually describes diagnostic, repair, software, warranty or service information.

How should a used-car buyer use this bulletin?

Use it as a research signal. Compare it with recalls, owner complaints, service records, a VIN report and an independent inspection before buying.

Check the exact VIN before you buy

Model-level pages show public safety patterns. A full VIN report helps confirm the exact vehicle, decoded specs, recall applicability and buyer checks.

Get Full Report