NHTSA service bulletin

NHTSA Service Bulletin 10202248: 2020, 2021 Altec Pressure Digger

Official manufacturer communication context for 2020, 2021 Altec Pressure Digger, with affected products, buyer checks and links into Carchieve recall, problem and VIN research.

NHTSA service bulletin 10202248 summary graphic for 2020, 2021 Altec Pressure Digger
10202248NHTSA document ID
Warranty program / extensioncommunication type
1affected product rows
1source rows grouped

Reviewed June 2026 from NHTSA manufacturer communication and service bulletin records. Carchieve is independent and not affiliated with any vehicle manufacturer or government agency.

Quick answer

Altec has learned that supplier-provided auger transmission gearboxes for the HD35A derricks built from May 2020 to January 2021 have an oversized square-drive opening for the kelly bar in the output drive sleeve. This results in an improper fit with the kelly bar, which can lead to excessive wear on the lower packing seals and premature hydraulic oil leakage. Altec requires that the output drive sleeve be replaced no later than the next preventive maintenance interval. This repair is covered under the Altec Warranty Policy and must be performed at an Altec facility

What this bulletin may mean before buying

Treat this as service research, not a verdict on one car. Before you buy, compare this communication with official recall campaigns, model-level owner complaint patterns, and the exact vehicle’s VIN-decoded specifications. A bulletin can help you ask a seller or dealer sharper questions about software updates, known repairs, warranty extensions and service history.

Affected products listed in this communication

MakeModelModel yearsBuyer note
AltecPressure Digger2020, 2021Ask for service records and run the exact VIN before purchase.

Buyer checklist

  1. Run the 17-character VIN and confirm the year, make, model, engine and equipment match the listing.
  2. Check recall campaign pages for safety actions that may require dealer repair.
  3. Compare this bulletin with common problem pages for the same model and component area.
  4. Ask the seller or dealer whether the bulletin procedure, update or inspection has already been completed.
  5. Use the used-car buying checklist and get an independent inspection.

Frequently asked questions

What is NHTSA service bulletin 10202248?

Altec has learned that supplier-provided auger transmission gearboxes for the HD35A derricks built from May 2020 to January 2021 have an oversized square-drive opening for the kelly bar in the output drive sleeve. This results in an improper fit with the kelly bar, which can lead to excessive wear on the lower packing seals and premature hydraulic oil leakage. Altec requires that the output drive sleeve be replaced.

Is a service bulletin the same as a recall?

No. A recall is a safety campaign with a required remedy for affected VINs. A service bulletin or manufacturer communication usually describes diagnostic, repair, software, warranty or service information.

How should a used-car buyer use this bulletin?

Use it as a research signal. Compare it with recalls, owner complaints, service records, a VIN report and an independent inspection before buying.

Check the exact VIN before you buy

Model-level pages show public safety patterns. A full VIN report helps confirm the exact vehicle, decoded specs, recall applicability and buyer checks.

Get Full Report