NHTSA Service Bulletin 10223711: 2016, 2017 Jeep Compass
Official manufacturer communication context for 2016, 2017 Jeep Compass, with affected products, buyer checks and links into Carchieve recall, problem and VIN research.
Reviewed June 2026 from NHTSA manufacturer communication and service bulletin records. Carchieve is independent and not affiliated with any vehicle manufacturer or government agency.
Electronic Shifter Module (ESM) Special Notes below from previous Techtips; NOTE 1: If mismatch between shifter NIK and PRNDM occur, it may appear that the PRNDM will not light up the first time the shifter is woken up via CAN. Please wait 2 minutes 15 seconds for the PRNDM lights to come back on. This is due to a software update feature of the Shifter lower (04670682A$). During PRNDM software update, the shifter will not be functional. NOTE 2: If Shifter is awake on CAN while disconnecting PRNDM from Shifter (04670682A$), U114C-00 will activate. This is by design and does not require replacement of PRNDM. NOTE 3: PRNDM supply Voltage from Shifter will be deactivated after 3 seconds if PRNDM is disconnected from Shifter while Shifter is awake via CAN and U114C-00 will activate. Power to Shifter will have to be removed for approx.. 20 seconds after PRNDM is connected to reset power to PRNDM from the Shifter. Power can be reset by removing battery power or disconnecting the shifter main connector. This is due to a safety feature built into the Shifter that will cut power to the PRNDM if a communication error is observed between the Shifter and PRNDM. NOTE 4: If Shifter is not responsive after Dead Battery condition, Charge Battery, and once complete disconnect battery terminals for 30 seconds and reconnect. Check Shifter functionality. Please return parts back to FCA Engineering if PRNDM is deemed non-functional after performing this TECHtip. ~
What this bulletin may mean before buying
Treat this as service research, not a verdict on one car. Before you buy, compare this communication with official recall campaigns, model-level owner complaint patterns, and the exact vehicle’s VIN-decoded specifications. A bulletin can help you ask a seller or dealer sharper questions about software updates, known repairs, warranty extensions and service history.
Affected products listed in this communication
Buyer checklist
- Run the 17-character VIN and confirm the year, make, model, engine and equipment match the listing.
- Check recall campaign pages for safety actions that may require dealer repair.
- Compare this bulletin with common problem pages for the same model and component area.
- Ask the seller or dealer whether the bulletin procedure, update or inspection has already been completed.
- Use the used-car buying checklist and get an independent inspection.
Frequently asked questions
What is NHTSA service bulletin 10223711?
Electronic Shifter Module (ESM) Special Notes below from previous Techtips; NOTE 1: If mismatch between shifter NIK and PRNDM occur, it may appear that the PRNDM will not light up the first time the shifter is woken up via CAN. Please wait 2 minutes 15 seconds for the PRNDM lights to come back on. This is due to a software update feature of the Shifter lower (04670682A$). During PRNDM software update, the shifter.
Is a service bulletin the same as a recall?
No. A recall is a safety campaign with a required remedy for affected VINs. A service bulletin or manufacturer communication usually describes diagnostic, repair, software, warranty or service information.
How should a used-car buyer use this bulletin?
Use it as a research signal. Compare it with recalls, owner complaints, service records, a VIN report and an independent inspection before buying.
Check the exact VIN before you buy
Model-level pages show public safety patterns. A full VIN report helps confirm the exact vehicle, decoded specs, recall applicability and buyer checks.
Get Full Report