What is a Carchieve vehicle history report?

A Carchieve report is a complete safety and records check on any U.S. vehicle. Enter the 17-character VIN and you get the decoded vehicle identity and full specifications, every open safety recall, owner-reported complaints by system, official NHTSA crash-test ratings, and a buyer action plan, in one clean report and a downloadable PDF.

How is Carchieve different from a typical VIN lookup?

Carchieve doesn't just dump raw data. It authenticates the VIN, organizes every federal safety record into a buyer-ready dossier, scores the vehicle, and tells you exactly what to inspect, ask and verify before you pay, the way a careful mechanic would read the car.

How fast will I get my report?

Reports are generated in under a minute. As soon as your VIN is checked against the recall, complaint, ratings and identity databases, your report and PDF are ready to view and download.

Can I buy more than one report?

Yes. A single report is $24.99. If you're comparing several cars, the 3- and 5-report bundles save you money per report and the extra credits stay in your account until you use them.

What information do I need to run a report?

Only the 17-character Vehicle Identification Number (VIN). The VIN is on the lower-left corner of the windshield, the driver-side door jamb, and the vehicle title or registration.

Where does the data come from?

Every report is built from authoritative U.S. vehicle databases, including the National Highway Traffic Safety Administration (NHTSA) recall, complaint and 5-Star safety-rating programs and the federal VIN product information catalog. Carchieve authenticates the VIN check digit so you know the identity is genuine.

Can I share the report with a seller or mechanic?

Yes. Every report includes a professionally formatted PDF you can download, print, or forward to a private seller, dealer, or mechanic to support your buying decision.

NHTSA Service Bulletin 11017081: 2022-2025 Ram 2500

Official manufacturer communication context for 2022-2025 Ram 2500, with affected products, buyer checks and links into Carchieve recall, problem and VIN research.

11017081NHTSA document ID

Manufacturer communicationcommunication type

4affected product rows

90/100quality score

Reviewed June 2026 from NHTSA manufacturer communication and service bulletin records. Carchieve is independent and not affiliated with any vehicle manufacturer or government agency.

Quick answer

"ADJUSTER Seat DJ D2 DP 1st Row Power Seat Fore/Aft Adjuster Inspection TSB is also released for this concern. SYMPTOM/CONDITION: Fore-aft function does NOT work when actuating the seat switch. DIAGNOSIS: 1) Put seat in position for inspection. 2) Disconnect seat wire harness motor connector from the fore-aft motor on the seat adjuster, wait 10 seconds, and reconnect. 3) Verify function of the fore/aft adjuster. Step 1. Open 2nd row door and function rear seat cushions up to stowed position. Step 2. Adjust the driver front seat to the full up position. Use switches on the side shield to move power seat fully up. Step 3. Remove the 4 bolts that hold the seat to the truck floor and discard. The bolts have lock patch that is not reusable. Step 4. Lay the seat down so its laying on its back so the underside of the seat is easily accessible. Step 5. Remove the fore/aft wire harness motor connector from the fore/aft motor (back right of the seat adjuster). Push on the tab to remove the motor wire harness connector from the motor. Leave disconnected for 10 seconds. Step 6. Reconnect the fore/aft wire harness motor connector to the fore/aft motor. Push / Pull / Push the connector with fingers to ensure the wire harness connector is fully seated to the fore/aft motor connector. Step 7. Before assembling the seat back to the truck floor, cycle the seat to check that the motor is working properly by pressing the fore/aft switch. If fore/aft motor does not function, please refer to Replacement Procedure below. Step 8. If the seat is working properly, carefully reassemble the seat back to the truck floor using the four new bolts. Use a torque wrench to verify 47 Nm. Step 9. *Note: Checking the passenger seat will be the same procedure as the driver seat. REPLACEMENT PROCEDURE Only for seats rejected after inspection. Replace Power Seat Adjuster per MOPAR service part replacement instructions. MOPAR Part Numbers: 68455847AA, 68455848AA, 68455849AA"

What this bulletin may mean before buying

Treat this as service research, not a verdict on one car. Before you buy, compare this communication with official recall campaigns, model-level owner complaint patterns, and the exact vehicle’s VIN-decoded specifications. A bulletin can help you ask a seller or dealer sharper questions about software updates, known repairs, warranty extensions and service history.

Affected products listed in this communication

MakeModelModel yearsBuyer note

Ram25002023-2025Ask for service records and run the exact VIN before purchase.

Ram35002023-2025Ask for service records and run the exact VIN before purchase.

Ram45002022-2025Ask for service records and run the exact VIN before purchase.

Ram55002022-2025Ask for service records and run the exact VIN before purchase.

Buyer checklist

Run the 17-character VIN and confirm the year, make, model, engine and equipment match the listing.
Check recall campaign pages for safety actions that may require dealer repair.
Compare this bulletin with common problem pages for the same model and component area.
Ask the seller or dealer whether the bulletin procedure, update or inspection has already been completed.
Use the used-car buying checklist and get an independent inspection.

Frequently asked questions

What is NHTSA service bulletin 11017081?

Is a service bulletin the same as a recall?

No. A recall is a safety campaign with a required remedy for affected VINs. A service bulletin or manufacturer communication usually describes diagnostic, repair, software, warranty or service information.

How should a used-car buyer use this bulletin?

Use it as a research signal. Compare it with recalls, owner complaints, service records, a VIN report and an independent inspection before buying.

Check the exact VIN before you buy

Model-level pages show public safety patterns. A full VIN report helps confirm the exact vehicle, decoded specs, recall applicability and buyer checks.

Get Full Report